NewSee how
Qatar Steel

Employer profile

Qatar Steel

Steel / industrialQatarCompany website

7 open roles

Current opportunities

Open roles at Qatar Steel

Qatar Steel
Qatar, QA

KEY ACCOUNTABILITIES: Description Internal Audit Strategic Planning Conduct an annual risk assessment to develop Risk Based Audit Plan. Assist in preparing the Internal Audit plan and provide input to support Qatar Steel’s overall and IA strategic plan and KPIs. Assist in finalizing the Risk-based internal audit plan (at least annually) with IA Manager for review and approval of the Board Audit Committee; Review and suggest adjustment in the internal audit plan, as necessary, in response to the changes in Qatar Steel’s business, risks, operations, programs, systems, and controls; Support in communicating to the BAC, any significant interim changes to the internal audit plan. Internal Audit Operations Perform the assigned duties with honesty, diligence, and responsibility, in line with the IIA Code of Ethics and Standards. Support IA Manager to ensure organizational independence annually and consult with IA Manager to take necessary actions or safeguard measures if the independence is impaired. Execution of audits as per the Annual Audit Plan and submission of timely and accurate reports to different stakeholders. Participate in the kick-off meetings for Internal Audit with the relevant internal stakeholders ensuring the introduction of the internal audit scope, objectives and the identification of required information and documents etc. Ensure applicable engagements (assurance and advisory) of the internal audit plan is executed, including the establishment of objectives and scope, the documentation of work programs and testing results, and the communication of engagement results with applicable conclusions and recommendations to appropriate parties. Ensure the presentation of the preliminary findings to the relevant internal stakeholders to obtain the required clarifications, review justifications, supporting material, and agree on the required corrective actions. Review and validate identified repeated irregularities, collaborate with the relevant internal stakeholders to identify, and resolve root causes, and escalate unresolved and/or critical cases to the Internal Audit Manager for decision-making. Assist in conducting special assignments, including audits, investigations, and other services (including support when requested) as directed related to breaches of the code of ethics, corruption, and fraud by either employees or contractors. Supporting Internal Audit Manager in co-ordinating with external stakeholders (e.g. State Audit Bureau, External Auditors etc.). Ensuring emerging trends and successful practices in internal auditing are being considered. Ensure trends and emerging issues that could impact Qatar Steel are considered and communicated to the Internal Audit Manager, as appropriate. Engaging the auditee: Openness and communication with the auditee to ensure comprehension of the audit scope, purpose and approach. Engage with the Internal Audit Manager and/or Senior Auditor to obtain his guidance as and when required for the successful completion of various assignments including supervisory review for the ongoing projects. Ensure quality review and archival of audit documentation. Develop and apply foundational IT knowledge to assess technology-related risks and controls during audits. Assist in evaluating IT general controls (ITGCs), application controls, cybersecurity measures (inhouse/in consultation with External Consultant and IT team). Ensure that the necessary IT competencies, awareness of emerging technologies (e.g., Artificial Intelligence (AI), Cybersecurity and other topical requirements as per IIA) exist and integrate IT risks into the audit plan. Collaborate with IT leadership to understand critical systems and data flows and ensure the internal audit function can evaluate IT controls, data integrity, and system security effectively. Support the Internal Audit Manager/Senior Auditors for the attainment, scoping and execution of required external Audit Services Providers (e.g. Information Technology Auditors), ensuring the review of the preliminary audit findings, validating the findings with the relevant internal stakeholders, agreeing on relevant corrective action plans and timeframes, and follow-up to ensure their resolution. Follow-up Coordinate with the Auditee to review the progress/evidence of agreed open/overdue actions. Assist in preparation of periodic Follow-up reports to monitor the timely completion of open/overdue corrective actions from previous audits. Reporting Support the Internal Audit Manager in preparation and timely submission of reports to Management and Board Audit Committee. Support the Internal Audit Manager in achieving the Departmental Key Performance Indicators (KPIs) and preparation of KPI reports. Adherence to the IA Policies and Procedures (including Guidelines) etc. and support the Internal Audit Manager for their periodic review & updation. Adherence to Qatar Steel’s relevant policies and procedures, unless such policies and procedures conflict with the Internal Audit Charter & Process. Any such conflicts will be resolved or reported to the Internal Audit Manager for further communication to the BAC. Compliance of Policies and Procedures, IIA Standards & Code of Ethics Assist in the development and implementation of departmental policies, systems, processes, procedures, and controls covering all areas so that all relevant procedural/legislative requirements are fulfilled while delivering a quality, cost-effective service in a consistent manner. Periodically help the Internal Audit Manager in assessing the purpose, authority and responsibility of internal audit and recommend adjustments as required. Compliance with relevant State Laws of Qatar, Circulars and directives of the QatarEnergy, IQ, Board of Directors, MD&CEO and conformance with the IIA Standards, Code of Ethics & Guidelines etc. issued by IIA. IIA Internal Auditing Competency Framework Internal Auditing Competencies International Professional Practices Framework: Develop the engagement work program incorporating applicable Standards, Topical Requirements, and Global Guidance, demonstrating due professional care. Ethics and Professionalism : Applies ethical principles in audit work, ensuring impartiality and adherence to professional responsibilities. Recognize and appropriately disclose impairment to objectivity when assigned to an audit engagement involving a department where the individual formerly worked. Quality Assurance and Improvement Program: Support the Quality Assurance and Improvement Program (QAIP) by adhering to professional Standards, participating in internal and external assessments. This includes driving continuous improvement in audit quality and performance and contribute towards overall effectiveness of the Internal Audit department. Conduct gap assessment against GIAS and assist in drafting and implementing recommendations for improvement. Conduct an internal quality assessment, develop a roadmap for elevating the internal audit function’s maturity, and advises leadership on strategic improvements. Ensure professional growth by enhancing the knowledge, skills, and competencies through ongoing learning through various platforms, seeking feedback etc. Audit Methodologies: Support in developing an engagement work program that includes analytical procedures and sample-based testing to assess the effectiveness of controls. Integrated and Coordinated Assurance: Support an internal audit engagement by gathering information on risk assessments performed by other assurance providers. Reporting Results: Prepare concise, well-structured audit reports that clearly communicate findings, root causes, and actionable recommendations, supported by sufficient relevant and reliable evidence. Collaborate with stakeholders to validate results and incorporate management feedback, ensuring completeness and accuracy of final reports. Professional Competencies Leadership: Administer audit engagements, facilitating discussions with management on risk mitigation efforts and the feasibility of process improvements. Coordinates with internal auditors and management to efficiently complete tasks within established timelines. Professional Communications: Communicate the audit engagement objectives and scope clearly and professionally, adapting content for various audiences. Coordinate with management to schedule meetings, draft agendas, and document discussions. Apply effective questioning techniques during interviews and ensures timely updates to project documentation, including meeting minutes and follow-up actions. Negotiation and Conflict Management: Overcome management disagreements on engagement conclusions by emphasizing relevant, sufficient support and collaborating to identify possible root causes and feasible action plans. Data Analysis: Perform data analysis using Information Technology tools (e.g. TeamMate Analytics and MS excel wherever required) in internal audit activities to identify potential indicators & findings. Project Management: Administer audit engagements from planning to final reporting, coordinating teams, timelines, and resource allocation. Apply risk-based project management techniques to enhance audit effectiveness and efficiency and monitor engagement progress to ensure objectives are met. Governance and Risk Management Competencies Governance: Manage audit engagements assessing governance maturity and recommends enhancements to align with leading practices. Strategy: Support audit engagement evaluating the effectiveness of strategy-setting processes while launching a strategic initiative, including identifying objectives and mitigating risks to successful achievement. Enterprise Risk Management: Manage audits of risk management frameworks, reporting mechanisms, and response strategies. Provides recommendations to enhance ERM maturity and integrate risk management into strategic decision-making. Evaluate the influence of organizational culture on risk practices and stakeholder engagement. Compliance: Evaluate the effectiveness of compliance programs in supporting governance, monitoring objectives, and delivering training. Assess adherence to regulatory and ethical obligations, and identify control weaknesses in compliance processes, recommending improvements to enhance design and implementation. Fraud: Lead fraud risk assessments and audit procedures to evaluate the effectiveness of fraud prevention and detection controls. Analyse anomalies to identify potential fraud indicators and root causes. Assess governance and risk management practices related to fraud oversight and recommend improvements to internal controls. Organizational Resilience: Assess whether the results from disaster recovery simulations led to action plans that were implemented. Sustainability: Assess how social and environmental objectives are embedded within the organization’s governance, strategy, and risk management. Evaluate the effectiveness of related control processes, identify gaps between documented sustainability practices and actual implementation and collaborate with management to determine root causes and validate findings. Operational Area Competencies Demonstrate working knowledge of key operational areas including Accounting, Finance, IT, HR, Cybersecurity, Supply Chain, CRM, Marketing, and Sales to effectively assess risks, controls, and processes across diverse business functions and sectors. Others High degree of what-if scenario building, analysis, and modelling to establish the effectiveness of practices at Qatar Steel. Emphasize decisions by consensus that result in cost and control effectiveness in Qatar Steel. Assist in the preparation and consolidation of the Internal Audit department’s budget and monitor financial performance versus the budget so that the business is aware of anticipated costs/revenues; areas of unsatisfactory performance are identified, and potential performance improvement opportunities are capitalised upon. Assume responsibilities for those aspects of Quality and HSE management systems over which they have control. Protect the assets of the Company from all related risks including any fraud, irregularities, or errors. Study and ensure that emerging trends and successful practices in internal auditing are being considered. Demonstrate the principles of integrity, objectivity, confidentiality and competency are applied and upheld. Attend the assigned trainings and upgrade the required skills as and when required to increase efficiency. Assist in carrying out any other management-requested assignments as directed. QUALIFICATIONS, EXPERIENCE, & SKILLS: Minimum Qualifications: Bachelor’s Degree (Major in Commerce/Accounting/Auditing) and CA / ACCA / CPA or equivalent professional qualifications. CIA, CISA, CFE, DISA and equivalent certifications would be an added advantage. Minimum Experience: 5 years minimum experience in the field of internal audits, preferably in a steel/manufacturing industry. Job-Specific Skills (Generic / Technical): Excellent knowledge of Policies & Procedures with strong and demonstrated experience in auditing. Advanced customer service orientation. Ability to work in a team environment and sometimes independently with minimal supervision as the task may be from time to time. Strong conflict management, facilitation, and resolution skills. Excellent relationship building skills. Extensive skill handling personnel from a multi-cultural work environment. Excellent verbal and written communication and presentation skills. Excellent decision-making and problem-solving skills. Good understanding of Qatar and GCC culture and working environment.

Posted 9mo ago
Qatar Steel
Qatar, QA

KEY ACCOUNTABILITIES: Description Respond to fire alarms and emergency calls to protect lives, property and environment. Operating tools and equipment used for firefighting safely and effectively Providing appropriate medical care within their scope of knowledge in emergency situations Analyzing hazardous situations and thinking of quick solutions and actions Inspect scenes of fire or accidents to identify causes or discover significant findings Participates in specialist stand-by duties using firefighting equipment’s breathing apparatus and specialist rope rescue equipment during plant routine maintenance and emergency situation. Participates and mobilize the rope rescue equipment’s onsite for stand-by duties such as high-risk elevated activities and confined space entry. Conduct the plant site inspection for confined space entry and prepare the rescue plan Maintain Comprehensive knowledge of the local topography Conduct Gas Test inside the plant premises Conduct Basic Firefighting training for plant employees. Conduct daily routine foam trailer inspection and maintain the record Handling different types of stretchers for emergency use. Write accurate reports after incidents and submit them to Senior Firefighter Clean and maintain personal equipment and keep it ready for use Participate in fire drills as a way to stay alert and up-to-date with job duties Ensures operation of Firefighting equipment by completing preventive maintenance requirements, following manufacturer’s instructions, and troubleshooting malfunctions. Evaluates new Firefighting equipment and techniques. Follow all relevant safety, quality and environmental management policies, procedures, and controls to ensure a healthy and safe work environment. Perform other related duties or assignments as directed by supervisor / line Manager. QUALIFICATIONS, EXPERIENCE, & SKILLS: Minimum Qualifications: Secondary School Certification from a recognised professional institute Minimum 3 to 6 Months Firefighting Training from a recognised professional institute First Aid certification or NEBOSH certificate preferred. Minimum Experience: Minimum 3-5 years of experience in the integrated Steel plant/Oil and gas industry/Petrochemical. Job-Specific Skills (Generic / Technical): Understand basic Hazardous Material response procedures. Very good knowledge in Firefighting with strong and demonstrated experience in handling / managing emergency situation along with drafting reports. Ability to work effectively with fellow employees and management personnel at all levels to include multinational staff Ability to work in a team environment and sometimes independently with minimal supervision as the task may be from time to time Demonstrate the ability to think clearly and calmly under stress situations. Good relationship building skills. Skill handling personnel from a multi-cultural work environment. Good verbal and written communication and presentation skills. Good decision making and problem-solving skills. Good understanding of Qatar and GCC culture and working environment.

Posted 9mo ago
Qatar Steel
Qatar, QA

KEY ACCOUNTABILITIES: Description Technical Operation Identify all scrap supplying to EAF in accordance with demand and take appropriate measures to ensure that scrap, quantity and quality are in conformance with specification in charging basket and avoid mixing. Identify and segregate scrap contamination materials such as non-ferrous, non-conductive, oversize, airtight and explosive in order to maintain safe supply to EAF. Monitor and control outsourced Logistics and operatives to supply different materials at various locations to meet the requirement of Steel Making and ensure that raw materials are supplied without any contamination that may harm, interrupt or reduce quality. Prepare, receive and provide scrap basket in a sequence dumped with safe hanging condition as per the basket schedule pattern. Ensure and validate communication channel in order to maintain effective communication with co- worker and supportive team through TMR to run smooth operation. Communicate and check frequently with EAF, Truck Scale and production units to meet the requirement of Steel Making. Implement both planned and unplanned changes to the operation/ process control as directed by supervisor and ability adopt the changes in work scenario. Maintain routine inspection on scrap basket and preparation area to avoid interruption in the facility. Perform housekeeping at basket platform, basket pit, scrap yard and all related work areas for smooth operational activities. Communicating all the issues and unsafe conditions of the work area to shift in charge to take appropriate action by supervisor Communicate with reliver about current status and operation parameters to act accordingly. Reporting Prepare check sheets for the condition of Pulpit (Basket preparation area) Reporting of basket condition, bottom /leakage in PMMS while supplying as well as shift in charge for immediate resolutions Confirming charge mix and basket charge timing in PMMS with EAF control room. Policies, Systems, Processes & Procedures Follow all relevant departmental policies, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner. Health, Safety & Environment Comply with all relevant safety, quality and environmental management policies, procedures, and controls to ensure a healthy and safe work environment. Ensure full adherence to all operating procedures and HIRA consistently, understand and follow safety precautions during handling and dumping of molten slag. Participate in activities to identify Hazard & Risk Assessment and Job Cycle Check to implement proper corrective action. Continuous improvement Contribute to the identification of opportunities for continuous improvement and sustainability of systems, processes and practices considering global standards, productivity improvement and cost reduction. QUALIFICATIONS, EXPERIENCE, & SKILLS: Minimum Qualifications: Secondary School / Technical School graduation. Technical Diploma preffered Minimum Experience: 1-3 Years of experience in similar role Job-Specific Skills (Generic / Technical): Specific knowledge and understanding of process operation. Planning and Organising Skill. Complete knowledge of operating and safety procedures and standards. English language skills – written and spoken. SHE awareness and ability to promote SHE awareness among subordinates and excellent verbal and written communication and presentation skills. Ability to work in a team environment and sometimes independently with minimal supervision as the task may be from time to time. Use of the English (must) and Arabic language (preferred). Verbal and written communication and presentation skills. To be computer Literate and command in MS-Office for report writing and presentation.

Posted 9mo ago
Qatar Steel
Qatar, QA

KEY ACCOUNTABILITIES: Description Technical Maintenance Activities Analyze the daily maintenance activities from the daily log books and record sheets versus the plan and make any required modifications to subsequent daily plans in order to support the achievement of the maintenance plans. Analyze the vibration and maintenance result sheet, identify, design and propose to management technical maintenance improvements and/or equipment developments in order to support the continual technical improvement of maintenance provision. Identifying and addressing technical problems with implementing solutions for rectification. Conducting technical research and applying new knowledge. Study and review engineering designs for new projects and identify the variations Prepare Tender documents for CAPEX projects, evaluate the Technical Offers, schedule the project timeline and cash flow, coordinate with internal and external parties for execution, monitor the progress and confirm the project completion according to the approved schedule. Interact daily with the operation team to interpret their needs and requirements and represent them in the field. Carry out and supervise all maintenance programs for critical and/or complex plant equipment including all types of mechanical equipment in order to ensure that continuous plant availability and equipment downtime is minimized. Confirm execution of all maintenance program (Preventive, Predictive, Breakdown) with the plant /shift supervisor in order to ensure the achievement of high standards of plant and equipment operation with minimal production downtime Communicate and co-ordinate with vendors, technology suppliers & third parties for all plant know-how issues, troubles, upgrading & modifications in order to ensure that maintenance provision meets the ongoing needs of the production process. Identify and recommend equipment / systems for procurement, provide technical specification, perform technical evaluation of equipment and suppliers and ensure effective commissioning and follow up where appropriate. Manage discrete projects and support / contribute to larger projects, e.g. internal expansion, from feasibility study through to implementation in order to ensure that projects are delivered to time, cost and quality standards Apply engineering technical knowledge and skills in Mechanical maintenance in various aspects of applications Identify and evaluate opportunities to import substitution for challenges like high cost, obsolete spare parts to ensure the reliability of the asset. Planning Prepare maintenance annual plans activity in order to ensure the achievement of high standards of plant and equipment operation with minimal production downtime. Plan, identify and recommend equipment / systems /spares for procurement, provide technical specification, perform technical evaluation of equipment and suppliers and ensure effective commissioning and follow up where appropriate. Prepare long term maintenance plan for own area, for management approval, in order to ensure that plant and equipment maintenance needs are met and production process availability optimized for the coming 5 years. Budgeting & Inventory Control Prepare and propose annual budget OPEX /CAPEX figures for management approval that accurately represent anticipated costs and enable effective cost management Monthly review for the budget consumption figures for mechanical to be in line with the approved budget consumption plan. Control the record management systems to manage inventory holding including its costs and to ensure that minimum stock is available all the time without unnecessary duplication. Review the monthly shift schedule plan to ensure the overtime within the approved budget . Supporting Activities Support and provide guidance to his team in technical studies to contribute to ongoing development of maintenance and operation activities to ensure the technical problems are effectively resolved. Support management in achieving the targets of company corporate objective such as safety, profitability and sustainability. Data Recording and Analysis Periodical review of inspection results and perform data analysis to predict the expected troubles and ensure that plant and equipment data is available and well analysed. Ensure all the data records follow relevant certifications such as ISO-9001, 14001, 45001 etc. Reporting Prepares the reports to management with the data analysis and recommendations to achieve the best performance in all manners. Report technical abnormalities with recommendations to the management in order to ensure senior management have sufficient information to support decision making and giving direction for appropriate remedial action and / or planning of future maintenance activity. Review of delays and fault reports for root cause analysis corrective actions Continuous Improvement Identify and develop improvements to operating standards, policies, and procedures to support continuous improvements in operating performance. Lead and promote technical development in equipment and process maintenance in order to ensure continuous improvement in operation and achieving maintenance KPIs. Health, Safety & Environment Identifying hazardous situations and evaluate the relevant risk in order to conclude appropriate action to maintain safe working environment. Confirm compliance with all relevant safety, health and environmental procedures and raise any of HSE concerns and incidents to HSE with the recommended actions to ensure safe work practices and environment and to achieve corporate Zero Harm Objectives. Continuously review operating and safety standards and procedures (HIRA/PTW/LOTO/TBT . . . etc) in DR-M area, updating and modifying as appropriate under the direction of the Section Head Contribute in all PSM and HAZOP studies in DR-M plants. Prepare annual plan for monthly safety meeting and attend all safety patrols & meeting. Review the reported observations in the monthly safety activities in the department including HES safety patrol, MRM, fire drill and environment audit and confirm its closing action plan in order to ensure any HES operating issues are understood and appropriate corrective action is taken Policies, Processes and Procedures : Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications Draft all Standard Operation Procedures for all maintenance activities in his area. Confirm the continuous process of reviewing the operating and safety standards and procedures, updating and modifying as appropriate under the direction of the Maintenance Section Head Identify and design system to ensure all operating, safety, environment, and quality procedures are followed to ensure the highest standards of operational integrity are achieved. Follows all relevant policies, processes, standard operating procedures and work instructions in the section so that work is carried out in a controlled and effective manner. Related Assignments Perform and carryout any additional assignment /tasks as required by management. QUALIFICATIONS, EXPERIENCE, & SKILLS: Minimum Qualifications: University Bachler degree in Mechanical Engineering Minimum Experience: Minimum 7 years of experience in Midrex Direct reduction plant Job-Specific Skills (Generic / Technical): In depth specialist skills and knowledge in own engineering specialism plus well-developed knowledge and understanding of the entire production operation Comprehensive understanding of DR process, associated function areas and understanding of all Steel Making Plants. Well-developed analytical skills. Complete knowledge in centrifugal compressors, rotary lobes blowers. Complete knowledge of static equipment (pipes, vessels etc.) maintenance best practices. Complete knowledge of DR plant hydraulic system maintenance. Comprehensive knowledge and understanding of safety, environment and quality system procedures and standards Comprehensive knowledge and understanding of HSE and quality procedures and standards. Complete Knowledge and understanding of process calculations and computations. Ability to read and interpret technical drawings and documents. Planning and organising skills. Ability to work both as part of a team and independently, on own initiative. Problem solving skills and Decision Maker/Taker Ability to understand financial planning and budgeting processes. Communication skills - written and verbal. Technical and business report writing skills.

Posted 9mo ago
Qatar Steel
Qatar, QA

KEY ACCOUNTABILITIES: Description Monthly / Annual Closing Periodic closing and opening subsequent month Cost Management and Inventory modules. Overhead allocations and absorptions allocations on monthly basis. Allocation of joint cost through mass allocation. Prepare books closing JV though overhead allocation. Prepare working for absorption variance and pass necessary JV before month close. Monitoring of pending transaction for inventory organizations and closing all inventory organization. Clearing of various WIP accounts. Monitoring expenses booking and scrutiny of trial balance. Running COGS recognition program and monitoring WIP jobs valuation. Passing necessary accounting JVs for WIP and absorption variances. Cost Control / Continuous improvement Preparation of monthly product cost sheet, process wise for DRI, steel making and rolling mill Preparing auxiliary product cost sheets for Lime, Dolo Lime, RBQ, etc Assist in collecting accurate and up-to-date product cost information for product prices. Advise / suggestion on cost centre creation Reporting To run fixed cost breakup for G&A and COGS, utility and overhead report, plant-wise depreciation report and fixed cost report by department and by GL account. Preparation of data pack for IQ reporting for quarterly reporting. Data for Ministry of Economics and Statistics, yearly. Data for producer price index and other external agencies. By product inventory details and its sales history for management reporting. Non-moving inventory item report and stock analysis report for leadership meetings. Create discoverer report as per business requirement. Inventory/Material Accounting functions: Daily running of create accounting for all inventory organizations and completing multi-period accounting. Check for stuck transactions and getting it cleared with help of IT. To check for any pending or uncosted transaction in the inventory module. Monthly Inventory/GL reconciliation (MAD Summary). Running “transfer general entries to GL – cost management program, “transfer Journal Entries to GL- receiving”. “Create Accounting Receiving”. Create absorption element as per need/required changes. Raw Material landed cost management in system. Overhead absorption rate update in the system Debit note / credit note implication workings particularly for oxide pellet and scrap purchases and its loading on the inventory carrying cost in the system. Inventory reconciliation, monthly reconciliation of inventory subledger balances with GL. Participate in physical stock verification process. Assist with data for dealing with the statutory auditors for Half yearly and Year end audits relating to inventory and product costing. Policies, Systems & Processes Co-ordinate with the IT department for getting developed various reports for faster and correct reporting. Involve at the time of system upgrade. To work with IT for various automation processes Continuous Improvement Contribute to the identification of opportunities for continuous improvement and sustainability of systems, processes and practices considering global standards, productivity improvement and cost reduction. Quality, Health, Safety & Environment Follow the HSE rules, regulations and procedures of the company, and report any HSE concerns and incidents to the responsible person Other Carry out any additional tasks as required by the Management. QUALIFICATIONS, EXPERIENCE, & SKILLS: Minimum Qualifications: University Degree in Finance CA, CMA or CIMA qualification would be preferable. Minimum Experience: 6 years’ experience in Management Accounting in a manufacturing organisation. Steel Industry experience would be preferable. Job-Specific Skills (Generic / Technical): Computer skill - Good in Excel and Power point Experience in Oracle system Good standard of written and spoken English and well developed report writing ability Planning and organising skills Basic Supervisory skills Ability to work as part of a team Communication skills – written and verbal

Posted 9mo ago
Qatar Steel
Qatar, QA

Operates and controls Ladle furnace during ladle treatment (controls movement of roof, electrodes & ladle car, and Fe-alloys/ flux additions). Performs temperature measurement & collect steel & slag sample and delivers them to QC for chemical analysis. Inspects equipment’s & machineries in shifts on time-to-time basis & if observes any abnormal or breakdown informs his shift In-Charge.

Posted 6mo ago
Qatar Steel
Qatar, QA

KEY ACCOUNTABILITIES: Description Respond to fire alarms and emergency calls to protect lives, property and environment. Operating tools and equipment used for firefighting safely and effectively Providing appropriate medical care within their scope of knowledge in emergency situations Analyzing hazardous situations and thinking of quick solutions and actions Inspect scenes of fire or accidents to identify causes or discover significant findings Participates in specialist stand-by duties using firefighting equipment’s breathing apparatus and specialist rope rescue equipment during plant routine maintenance and emergency situation. Participates and mobilize the rope rescue equipment’s onsite for stand-by duties such as high-risk elevated activities and confined space entry. Conduct the plant site inspection for confined space entry and prepare the rescue plan Maintain Comprehensive knowledge of the local topography Conduct Gas Test inside the plant premises Conduct Basic Firefighting training for plant employees. Conduct daily routine foam trailer inspection and maintain the record Handling different types of stretchers for emergency use. Write accurate reports after incidents and submit them to Senior Firefighter Clean and maintain personal equipment and keep it ready for use Participate in fire drills as a way to stay alert and up-to-date with job duties Ensures operation of Firefighting equipment by completing preventive maintenance requirements, following manufacturer’s instructions, and troubleshooting malfunctions. Evaluates new Firefighting equipment and techniques. Follow all relevant safety, quality and environmental management policies, procedures, and controls to ensure a healthy and safe work environment. Perform other related duties or assignments as directed by supervisor / line Manager. QUALIFICATIONS, EXPERIENCE, & SKILLS: Minimum Qualifications: Secondary School Certification from a recognised professional institute Minimum 3 to 6 Months Firefighting Training from a recognised professional institute First Aid certification or NEBOSH certificate preferred. Minimum Experience: Minimum 3-5 years of experience in the integrated Steel plant/Oil and gas industry/Petrochemical. Job-Specific Skills (Generic / Technical): Understand basic Hazardous Material response procedures. Very good knowledge in Firefighting with strong and demonstrated experience in handling / managing emergency situation along with drafting reports. Ability to work effectively with fellow employees and management personnel at all levels to include multinational staff Ability to work in a team environment and sometimes independently with minimal supervision as the task may be from time to time Demonstrate the ability to think clearly and calmly under stress situations. Good relationship building skills. Skill handling personnel from a multi-cultural work environment. Good verbal and written communication and presentation skills. Good decision making and problem-solving skills. Good understanding of Qatar and GCC culture and working environment.

Posted 6d ago
Some pages are available in English only.